Looking for a creepy-cute decoration that makes a statement? This crochet spider has a rounded body, multiple expressive eyes, curved legs, and tiny fangs for a playful Halloween display.

This crochet spider has the kind of oversized, friendly-spooky look that works especially well when you want Halloween décor to feel handmade rather than overly scary. The many eyes and little fangs give it character, while the long legs make the finished crochet piece instantly recognizable.

The construction is mostly built from simple amigurumi shapes, but the leg placement is where the finished spider really comes together. Taking a little extra care with symmetry, stuffing, and the bending points will help the spider sit evenly and give each leg the intended shape.

Materials & Tools Needed

• Yarn: Black yarn for the spider, or another color if you want a different look.
• Crochet Hook: Use the hook size appropriate for your yarn; a smaller hook helps create firm amigurumi stitches.
• Safety Eyes: Two 14-mm eyes and four 10-mm eyes.
• Fiberfill: Polyester stuffing for the head, body, and lightly stuffed legs.
• Tapestry Needle: For sewing the pieces together and weaving in ends.
• Scissors
• Stitch Marker: Helpful for keeping track of continuous rounds.
• Pins: Useful for positioning the legs and fangs before sewing.

Finished Size & Customization

The finished size will vary with yarn weight, hook size, and tension. Using thicker yarn will make a larger spider, while thinner yarn creates a smaller version.

You can also change the personality of the spider without changing the pattern. Try a purple, orange, or dark gray body, experiment with different eye sizes, or gently shape the legs into different positions. If you want the legs to remain more firmly posed, flexible wire can be added only if the finished piece will be handled appropriately.

Pattern Abbreviations & Terminology

• MR: Magic Ring
• sc: Single Crochet
• inc: Increase – 2 sc in the same stitch
• dec: Decrease – crochet 2 stitches together
• sl st: Slip Stitch
• BLO: Back Loop Only
• FLO: Front Loop Only
• st(s): Stitch(es)

US crochet terminology is used throughout.

Working in continuous rounds: The head, body, and legs are worked in a spiral rather than joined after every round. A stitch marker at the first stitch of each round can make the counting much easier.

Step-by-Step Crochet Instructions

Spider Head

The head is worked from the center outward, then gradually narrowed again. The increases create the rounded shape, while the decreases bring the opening back down so the head can be closed neatly.

Round 1: 6 sc in MR (6)

Round 2: [inc] x 6 (12)

Round 3: [1 sc, inc] x 6 (18)

Round 4: [2 sc, inc] x 6 (24)

Round 5: [3 sc, inc] x 6 (30)

Round 6: [4 sc, inc] x 6 (36)

Round 7: [5 sc, inc] x 6 (42)

Round 8: [6 sc, inc] x 6 (48)

Round 9: [7 sc, inc] x 6 (54)

Round 10: Work 1 sc in BLO around (54)

Why Round 10 is worked in BLO

The BLO round creates a visible change in the stitch direction. Here, it helps establish a subtle edge between the expanding portion of the head and the main head section. Keep your stitches even so this transition doesn’t become too loose.

Rounds 11–13: 1 sc in each st around (54)

Adding the Eyes

Insert the 14-mm safety eyes between Rounds 11 and 12, keeping them about 3 stitches apart.

Place the four 10-mm safety eyes around the larger eyes, keeping their spacing as even as possible.

It is worth positioning all six eyes before locking the backs into place. Looking at the head from the front first makes it much easier to correct an uneven expression.

Round 14: [7 sc, dec] x 6 (48)

Round 15: [6 sc, dec] x 6 (42)

Round 16: [5 sc, dec] x 6 (36)

Round 17: [4 sc, dec] x 6 (30)

Round 18: [3 sc, dec] x 6 (24)

Round 19: [2 sc, dec] x 6 (18)

Stuffing the Head

Add fiberfill now, before the opening becomes too small.

Work the stuffing around the inside edges first, then fill the center. The head should feel rounded and supported without being packed so tightly that the stitches stretch and show gaps.

Round 20: [1 sc, dec] x 6 (12)

Round 21: [dec] x 6 (6)

Fasten off, leaving a tail. Use the yarn needle to close the remaining opening and weave the end securely inside.

Spider Body

The body follows a similar increase-and-decrease structure, but it is elongated so that it provides the larger base needed for the legs.

Round 1: 6 sc in MR (6)

Round 2: [inc] x 6 (12)

Round 3: 1 sc in each st around (12)

Round 4: [1 sc, inc] x 6 (18)

Round 5: [2 sc, inc] x 6 (24)

Round 6: 1 sc in each st around (24)

Round 7: [3 sc, inc] x 6 (30)

Round 8: [4 sc, inc] x 6 (36)

Round 9: 1 sc in each st around (36)

Round 10: [5 sc, inc] x 6 (42)

Round 11: [6 sc, inc] x 6 (48)

Rounds 12–17: 1 sc in each st around (48)

Round 18: [7 sc, dec] x 6 (42)

Round 19: [6 sc, dec] x 6 (36)

Round 20: 1 sc in each st around (36)

Round 21: [5 sc, dec] x 6 (30)

Round 22: [4 sc, dec] x 6 (24)

Round 23: 1 sc in each st around (24)

Round 24: [3 sc, dec] x 6 (18)

Round 25: 1 sc in each st around (18)

Fasten off, leaving a long sewing tail.

A useful assembly check

Before sewing the body permanently to the head, place the two pieces together and check the front and back. The body should sit centered beneath the head rather than leaning to one side. Pins are especially useful here because they let you adjust the position before committing to the stitches.

Back Legs – Make 2

These two legs remain relatively straight and help establish the spider’s rear support.

Round 1: 8 sc in MR (8)

Round 2: [3 sc, inc] x 2 (10)

Rounds 3–15: 1 sc in each st around (10)

Fasten off, leaving a long tail for sewing.

Stuff very lightly if desired. Avoid firm stuffing because the legs need to remain flexible enough to position naturally.

Bending Legs – Make 6

These six legs create most of the spider’s characteristic shape. The BLO/FLO round is important because it creates a subtle change that helps the leg bend.

Round 1: 8 sc in MR (8)

Round 2: [3 sc, inc] x 2 (10)

Rounds 3–7: 1 sc in each st around (10)

Round 8: 5 sc in BLO, 5 sc in FLO (10)

Rounds 9–16: 1 sc in each st around (10)

Fasten off, leaving a long tail for sewing.

Lightly stuff if desired.

Why the BLO/FLO change matters

This isn’t simply an extra decorative round. Changing which loops you work into changes the direction and flexibility of the stitches, helping the leg form its bend. When you reach Round 8, keep the transition neat because this is the point that influences how the leg sits later.

Front Fangs – Make 2

The small front appendages give the spider its playful expression.

Round 1: 8 sc in MR (8)

Rounds 2–4: 1 sc in each st around (8)

Round 5: 4 sc in BLO, 4 sc in FLO (8)

Rounds 6–8: 1 sc in each st around (8)

Fasten off, leaving a long tail for sewing.

Lightly shape the pieces before attaching them so both fangs point in a similar direction.

Assembly & Positioning

Attach the Head to the Body

Sew the body to the head, aligning the body beneath the head around Rounds 10–15 of the head.

Work around the join gradually rather than sewing one side completely first. This keeps the pieces centered and helps prevent the head from tilting.

Attach the Fangs

Position the two fangs just beneath the larger eyes, around Rounds 13–14.

Pin both pieces first and look at the spider straight on. Matching their height and angle makes a noticeable difference to the finished face.

Position the Two Back Legs

Sew the two straighter legs onto the back area near the body/head join, around Rounds 13–15.

Angle them slightly outward so they support the overall spider shape instead of pointing straight down.

Attach the Six Bending Legs

Use the back legs as your placement reference, then arrange the six curved legs along both sides of the body.

Don’t sew all six immediately. Pin the legs first and check the spider from above and from the front. This makes it easier to create balanced spacing and prevents having to remove firmly sewn legs later.

Once the arrangement looks even, sew each leg securely using its long yarn tail.

Final Shaping

After everything is attached, gently bend and arrange the legs so the spider has an even stance. The curved legs should not all point in the same direction; slight variation can make the spider look more natural and lively.

Weave in all remaining yarn ends and trim the excess.

Your Crochet Halloween Spider Is Ready

With its oversized body, multiple eyes, little fangs, and carefully shaped legs, this spider has a fun spooky personality without looking too frightening. Place it on a shelf, table, Halloween display, or anywhere that could use a handmade touch.

The most important finishing detail is the leg positioning. Taking a few extra minutes to pin and view the spider from different angles before sewing will give you a much more balanced result than attaching each leg by eye as you go.